The VL is used where lower outlet pressures (0.5 to 2 bar) are needed. This low pressure need arises either when PRV is to be installed some floors above the point of use (due to duct space limitation etc.), Or When the no. of branches/ floors connected to the PRV are higher. Or, Also when bath fittings can work on pressures as low as 0.5 bar are used (some fittings and showers work well at 0.5 bar too!!).


Pressure Reducing Valves protect household water installations for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. The VL is specialy designed for lower outlet pressure without compromising on the flow rate. These are especially used when more then 4 branches are drawn from one downtake line and the last branch tends to get very high pressure in spite of using a PRV.


HTML Table Generator
SIZE (MM) W A B D
15 74 129 69 78
20 74 129 71 78
25 107 167 72 84
32 107 165 74 84
*all dimensions are in mm.

  • Built-in filter to prevent dirt particles from reaching internals thus avoiding static pressure failures.
  • Since the prv is Diaphragm operated it has better pressure control ,less noise and maintenance compared to the older piston operated PRVs.
  • Moreover, Diaphragm is thin walled , corrugation shaped for better flexibility & smoother operation. Increased surface area of diaphragm reduces overall size of PRV. i.e. compactness.
  • Nylon reinforced NBR Diaphragm for better strength and longer life.
  • Transparent filter cap which shows dirt accumulated on filter. (currently in 15 & 20mm size only)
  • Easy clean attachment (optional) helps flush out all dirt particles collected on filter at mere turn of a knob. No need to open the valve for cleaning. No downtime. No technician.
  • Moving parts are of low weight engineering plastic (with metal insert) to ensure quick response time to changes in inlet pressure or flow conditions thus reducing noise levels significantly and give smoother pressure control.
  • ‘Cartridge’ design internals - entire working mechanism is in a cartridge which operates independent of the body. Thus, servicing is without removing body from pipeline.
  • The valve cartridge is of high quality synthetic material and can be fully exchanged.
  • ‘Dual open’ design. Filter can be opened and cleaned from other side without disturbing pressure settings or removing working mechanism (cartridge).
  • In-built provision for inserting pressure gauge.
  • Inlet pressure balancing - Fluctuating inlet pressure does not influence outlet pressure.
  • Light weight.
  • Stainless steel spring & spring plate and powder coated Gun Metal / Bronze body (optional) for rust free, corrosion free, dezincification free valve for longer life.

OPTIONAL Easy Clean feature in VL-SC variant.
Has built in filter of ss304 with std 200 micron filter and with easy cleaning attachment


General Specifications of VL

Medium : Water, compressed Air, Nitrogen
Max Inlet Pressure : 16 bar #
Outlet Pressure Range : 0.5 to 2 bar *
Max Temperature: 45 deg Celcius #
Sizes 15 to 32 mm
End connections BSP female threaded
Body Gun Metal/ Bronze
Spring Spring Steel
Built in Filter SS316 mesh 400microns
Easy cleaning feature Only in VL-SC variants
Warranty 10 years

# higher temperatures and pressures available on request
* See W3 & VH for higher outlet pressure ranges


VL

Variant Name: VL

Description: Has built in filter of ss304 with std 400 micron filter

Body: GunMetal/ Bronze

Bonnet :Nylon

Cap: Gun Metal / Transparent plastic.

Internals: S.S., NBR; Brass; plastic

Filter: SS316 with 0.4 mm pore Size * wire mesh.
*0.8 mm or 0.2 mm mesh also available

Spring : Spring steel

Warranty: 10 years

VL-SC

"Same as VL but with additional EasyClean feature which will help remove all dirt online at mere turn of a knob without having to open the valve / filter mesh. Or needing a plumber to clean the filter"